PRICE
330,000 VND / Can (2 Kg)
PRODUCT DESCRIPTION
Waterproofing has very high elasticity, good adhesion to cement and concrete. Used to fill large cracks, joints or expansion joints. If you want to waterproof the floor or wall, apply a waterproof layer of CT-11A Flooring / Wall to create footing before CT-14 waterproofing plaster.
EXCEPTIONAL CHARACTERISTICS
- Waterproofing is 330% elastic (with a thickness of 1mm), creating elasticity for cracks and floor surfaces.
- Weather resistant, good alkali resistance.
- Resistant to submerge in water.
- It is the ideal waterproofing material for difficult, demanding projects with complex structures.
- Non-flammable, non-toxic, lead-free, mercury free and other hazardous substances, safe for construction and use.
PRODUCT INFORMATION
Surface applied
The surface of cement mortar, vertical wall concrete, water tank wall, swimming pool, basement.
CONSTRUCTION GUIDE
Surface preparation
- Cleaning the entire surface of cement, concrete: scrape off layers of mortar, damaged concrete, old paint layers, grease, chalk dust, moss.
- Then rinse.
Construction
1. Filling of cracks:
- Step 1: Widen the crack (if any), clean the surface, moisten the turbid position.
- Step 2: Mix the powder with a liquid component, stir the mixture thoroughly into a homogeneous paste, let stand 5-10 minutes for the reaction to occur completely.
- Step 3: Using a knife to spread the mixture on the crack, tighten the waterproofing mixture to increase adhesion and evenness. Take care to apply evenly to the surface, not to be missed, especially where there is a high possibility of infiltration. Allow the waterproofing layer to dry for 2 days before applying the next coat.
2. Elasticity of roof, toilet, tank, basement waterproofing:
- Step 1: Apply 1 coat of KOVA CT-11A Plus Flooring, allow to dry for at least 3-4 hours before applying the next step.
- Step 2: Using KOVA CT-14 elastic waterproofing plaster with a thickness of 150 - 200 (m (mix powder and liquid components, stir this mixture into a homogeneous paste, let stand for 5-10 minutes For reaction to completely occur, allow to dry for at least 24 hours before applying the next step.
NOTE
- In cases of great cracking risk, apply glass mesh as soon as the CT-14 layer is still wet.
- Where to mix until there, when mixed additives must be used up, within 30 minutes after which time the mixture will be frozen.
- Clean tools with clean water immediately after use.
SAFETY, HEALTH AND ENVIRONMENT INFORMATION
Working environment must be well ventilated. Avoid contact with skin or eyes. Wear gloves, mask and eye protection during construction. In case of contact with eyes, wash with plenty of clean water and seek medical advice immediately. Please refer to new technical and safety documents before use.
